How To Get Water Out Of Carpet?

After visiting home, have you ever encountered a flood caused by any leakage or pipe burst? That’s the biggest panic situation! You may think of calling a plumber and trying to dry every corner of the room. But wait, what if this flood has spurted in a carpeted room? In such a case, you may feel helpless and try to find “How To Get Water Out Of Carpet?”

How To Get Water Out Of Carpet

In this guide, we’ll provide you with a few amazing methods to tackle the carpet flooding problem and also give you insights on how you can fasten the drying process. So, keep reading!


How Long Does A Wet Carpet Take To Dry?

How Long Does A Wet Carpet Take To Dry

Usually, a wet carpet takes 12 to 24 hours to dry with professional drying equipment. But, if you are planning to air dry it under proper ventilation, then this time can go beyond 2 to 3 days.

The majority of carpet owners hang their carpets under the sun, and it takes around 24 hours to remove moisture. However, this time can be more on cloudy days or if you are living in a region with extreme weather conditions.

Whatever the drying time of your carpet is, you should wait for its complete moisture evaporation if you do not want to call upon the shedding and persistent staining of your wall-to-wall.


Harms Of Wet Carpet

Harms Of Wet Carpet

If you are planning to use a wet carpet, then stop right there! Because an un-moist carpet can make a ground for the growth of molds, mildew and several allergens.

It can also call upon carpet bugs and pests, such as beetles, lice, etc. Such bugs and allergens can damage the carpet fibers and harm your respiratory system, causing coughing, sneezing, dyspnea, and asthma.

Also, if you walk on a wet wall-to-wall, then its moist fibers will trap all the dirt carried by your footsteps and make your carpet filthier. It also makes your carpet prone to persistent staining, popularly known as wicking.

Hence, it’s better to sunbake the carpet or dry it under proper ventilation before you start using it!


Can Wet Carpet Dry By Itself?

Can Wet Carpet Dry By Itself

Yes, a carpet can dry by itself, but it will take a long time or even several days for complete moist removal. Also, sometimes, a carpet seems to be dried from the outer section, but it still holds some dampness deep in the backing.

If such a thing happens, then your carpet will lead to mold and mildew growth within 24 to 48 hours.

That is why we advise you to make a proper move to dry a wet wall-to-wall or consult a professional if you feel that your high-pile rug still holds some moisture after drying.


How To Get Water Out Of Carpet?

If you have a wet carpet, then your first step should be to act fast because the longer you take, the deeper the moisture will get into fibers, backing, and subflooring. If this moisture gets into the hard floor beneath your wall-to-wall, then it will make your floor prone to subtle discoloration, a musty smell, etc.

To not let this happen:

Determine The Source Of Water

Determine The Source Of Water

In most of the cases, the cause of a wet carpet is:

  • Plumbing Leakage
  • Moisture got in with rainfall
  • Leakage in appliances
  • HVAC system condensation
  • Accidental spills

Sometimes, it is also seeded by rooftop leakage, especially just after rain. Check thoroughly if your home has any of these problems and fix them before moving to the water elimination project.

Also, if the dampness is caused by rainwater, then divert its flow away from your carpeted room and close the doors and windows.

Check The Amount Of Water

Check The Amount Of Water

For this, walk over the carpet and check if the water squeezes out after getting a little pressure. You will also hear a squishing sound!

This sound indicated that perhaps the amount of water trapped in your wall-to-wall is more than your expectation. In such a case, you may need to lift up the carpet and dry it thoroughly, including its underlayment.

This is because leaving the water underneath the carpet can cause the carpet to develop molds and buckle.

Collect All The Equipment

Collect All The Equipment

Collect all the cleaning equipment in advance after checking the moisture level on your wall-to-wall. By this, you will not have to rush to grab any missing tools. Also, you will reduce your cleaning time and efforts to a minimum.

Here’s what you’ll need:

  • Dry Microfiber Towels
  • Wet/Dry Shop Vacuum
  • Box Fan
  • Dehumidifier
  • Air Mover Fan (optional)

Shift The Furniture

Shift The Furniture

Before you jump onto cleaning, shift all the furniture to a nearby room as soon as you notice a wet wall-to-wall. Also, check if any furniture has trapped any dampness. However, if you have hired a carpet installer, then a common question among people is do carpet installers move furniture?

If any, then wipe it with a clean towel and blow dry it to remove all the moisture trapped in the spores of furniture.

You have to check every upholstery furniture with more attention because they are most affected by water damage and can only be fixed by replacement.

Give Proper Ventilation Or Use A Dehumidifier

Give Proper Ventilation Or Use A Dehumidifier

Ventilate your room by opening all the doors and windows to let the air flow inside. After this, place a few fans near the extra wet part of the carpet to speed up the drying process.

If you live in a region with an extreme climate, then use a dehumidifier to evaporate the moisture from the carpet and the indoor environment.

Remove The Access Water With Wet/Dry Vacuum And Towel

Remove The Access Water

After shifting all the furniture, you can use a wet/dry vacuum to remove as much water as possible. For proper drying, you can move the vacuum several times until the cleaner continues to lift up the water.

Use a self-owned wet/dry vacuum or rent one from a professional carpet cleaning service. If you suspect any wall-to-wall damage, then consult an expert.

Otherwise, you can also use a steam cleaner or hot water extraction unit with a similar water-holding capacity to a wet/dry vacuum.

Once you’ve dried your carpet with a vacuum or steam cleaner, lay a few dry microfiber towels and press them a bit against the carpet. By this, the towel will suck up the water sitting deep into fibers.

Remember not to leave any damp towel on the carpet for long as it can make your carpet trap a small amount of moisture back.

Use Baking Soda

Use Baking Soda

To suck up the moisture left after vacuuming and laying microfiber towels, you can sprinkle a generous amount of baking soda all over the carpet.

The baking soda will not only soak the water left deep into the backing and fibers but also neutralize the musty smell due to water flooding. It will also eliminate molds and mildew and kill pests that get in due to carpet dampness.

For the best result, spread the baking soda evenly on the wall-to-wall and leave it for 1 to 3 days, depending on the level of moisture. Now, vacuum the carpet thoroughly to remove the baking soda and fluff up the carpet fibers.

Lift The Carpet And Replace Padding If It Doesn’t Dry

Lift The Carpet And Replace Padding If It Doesn't Dry

Before using a wet/dry vacuum, if your carpet was sopping due to dampness, then lift the carpet away from the padding, using a piler to check if the dampness has gone beyond the carpet backing or not. Make sure not to cut the carpet, as it will be difficult to fix a ripped portion of the wall-to-wall back.

After lifting, check the level of moisture that got into the padding and place a few big fans to dry up the wet carpet backing and underlayment!

If the moisture has reached up to the padding and it does not dry in 24 hours with ventilation and fans, then replace the padding with a new one before the molds and mildew grow over it.


Tips To Fasten The Carpet Drying Process

Tips To Fasten The Carpet Drying Process

To fasten the carpet drying process,

  • Maintain your carpeted room’s low humidity and temperature by using a dehumidifier and giving proper ventilation.
  • If the carpet moisture is caused by spills, such as oil, coffee, chocolate, or wine, then clean it immediately with a proper deep cleaning routine and then go for the moisture elimination step.
  • Deeply clean your carpet occasionally with a professional carpet cleaner or steam cleaner so that the spill or moisture does not become a reason for mold and mildew development.
  • If you are not sure about a DIY carpet drying process, then consult an expert or hire a professional carpet cleaning service.

Conclusion

A wet carpet can make your room look messy and develop several allergens that can harm your health. It can also damage your carpet by causing early shedding. So, if you think, “How To Get Water Out Of Carpet?” then check out a DIY carpet drying step and use the best drying tips to speed up the drying time.


FAQs

Can I remove water damage from the carpet?

Yes, you can remove the water damage from your beloved wall-to-wall. For this, you just need to add 50% vinegar to 50% of the water and apply it to the water stains. After applying, blot the stain with a clean microfiber towel by giving a slight press, and then rinse the carpet with clean water.

How do I know if my carpet holds mold?

If you are experiencing a wet, musty smell fuming out of your carpet, then this could be a sign that molds are growing on it. To fix it, you can either find a few simple DIY mold elimination methods or call a professional.

Can salt remove moisture from the carpet?

Yes, you can use salt to dry up your carpet. For this, sprinkle a generous amount of salt all over the wet area of the carpet and leave it to sit for a few hours. The salt will absorb all the moisture and restrict the mold growth due to dampness.

Leave a Comment