We understand you spilled the gorilla glue on your treasured carpet, and now it’s super sticky and ruining the aesthetic of your home. And now you are looking for ‘How to get gorilla glue out of the carpet” guides.
Well, Congratulations! You found your ultimate guide. Now let’s get on the ride to get the solution.
Just like its name, gorilla glue is a world super powerful glue creating bonds stronger than any of your best friends’ bonds.
Gorilla glue is both heat and cold-resistant adhesive and if you are wondering to get it out using water, then it’s water-resistant also.
So, how to get gorilla glue out of the carpet?
Why is Gorilla Glue A Super Glue?
Gorilla glue is made using a cyanoacrylate-based formula, which gives it high impact strength, viscosity optimized for easy flow control, and the versatility to bond with any type of material.
It’s a tough adhesive that will be challenging to get out of the carpet. So whenever the accident with gorilla glue happens, act quickly by wiping it off using a damp cloth.
How To Get Gorilla Glue Out Of The Carpet?
1. Using Rubbing Alcohol
Rubbing Alcohol, also known as isopropyl alcohol, is known to remove hardened glue from any surface effectively. This method is easy to carry out and doesn’t damage your carpet.
However, people have complained of skin irritation due to the use of isopropyl alcohol, so make sure you wear rubber gloves before starting the process.
Materials Required:
- Isopropyl Alcohol
- Medium-sized bowl
- A clean, dry cloth
1. Pour some isopropyl alcohol into the bowl.
2. Soak the dry towel entirely in the bowl which has isopropyl alcohol.
3. Cover the damaged area with this soaked towel.
4. Wait for about 5 minutes.
5. Gently pull the softened glue off without damaging the carpet.
2. Using Heat Gun
Another proven method is if you don’t have isopropyl alcohol or rubbing alcohol, then you can use a heat gun.
Materials Required:
- Paper towel
- Heat gun
1. Charge your heat gun and let it heat up to the maximum temperature.
2. Cover the dried gorilla glue on your carpet using a paper towel.
3. Apply the heat using the heat gun through the paper towel.
4. Once the glue gets soft, use the paper towel from the carpet.
If you don’t have a heat gun, then you can also use blow dry.
However, using a blow dryer will not give the best results as they do not emit the high-temperature heat that is required to melt the glue.
3. Using Iron
This method is the same as the heat gun, but instead of using a heat gun, you can use an iron.
However, we recommend testing it on a small area of your carpet because some carpets have plastic, and using iron on plastic material will also melt the carpet along with the glue.
Materials Required:
- Iron
- Dry cloth
- A knife
1. Scrap off as much glue from the carpet using a knife.
2. Once you scrape off the glue, place an old cloth over the damaged spot.
3. Turn on the iron and place it over the cloth. This will help soften the glue.
4. Remove the cloth once it has absorbed the glue.
4. Using Vinegar and Dish Soap
Another trusted solution to get rid of the gorilla glue from the carpet is using a mixture of vinegar and dish soap. However, vinegar is well known for its discoloring and staining properties when used on a carpet.
To start this process, first, check whether the glue is dry or damp. If the glue is damp, then mop it up, and if the glue is dried up, scrape it off using a knife.
Materials Required:
- Vinegar
- Dish soap
- Paper towel or cloth
1. Soak the paper towel or dry cloth in vinegar and blot it on the carpet for 1 minute.
2. Let the vinegar dissolve in the carpet for 15 minutes.
3. Mix one tablespoon of dish soap and one cup of warm water in a bowl.
4. After 15 minutes, dip a dry cloth in the dish soap solution and apply it to the carpet.
5. Scrub until the glue is removed.
6. If you don’t get the results, repeat this process again.
5. Using Ammonia
Using ammonia is a powerful method to get the gorilla glue off the carpet. Make sure you wear rubber gloves, as ammonia is a strong household chemical.
Materials Required:
- Ammonia
- Rubber gloves
- A bowl
1. Make a solution of one tablespoon of ammonia and a cup of warm water and stir it well.
2. Wear rubber gloves. Then take a dry clean towel and dip it into the solution.
3. Apply it to the damaged spot and scrub until the glue comes off.
Ammonia is used to brighten the color of clothes, so before applying the solution to the entire area make sure you patch-test it.
6. Using Acetone
Materials Required:
- Nail polish remover
- Cotton ball
- Dry cloth
1. Use a cotton ball and dampen it with some nail paint remover.
2. Apply this cotton ball on the carpet.
3. If the cotton ball starts to get dry and hard, replace it with a new one.
7. Using Ice Cubes
Materials Required:
- An ice cube or ice pack
- Dry cloth or paper towel
1. Start by putting ice cubes on the affected area on your carpet.
2. Once the glue is wet again, remove it using a dry cloth.
8. Using Vegetable Oil
Materials Required:
- Paper towel or old rag
- Any vegetable oil
1. Apply a layer of vegetable oil to the affected area on your carpet.
2. Let it soak for 10 minutes.
3. Wipe it using a paper towel.
4. You might need to reapply it until the residue is gone.
9. Using Baking Soda
If any of the above-mentioned methods don’t work and your carpet still feels sticky, then you can always go for baking soda.
Materials Required:
- Baking soda
- Clean cloth
1. Sprinkle some baking soda on the affected spot.
2. Scrub it with the old toothbrush in circular motions until the sticky glue is all gone.
3. Wipe the residue with a dry clean cloth.
10. Using scissors
You can also use scissors or a chisel to remove the gorilla glue from your carpet. This highly depends on the type of carpet you have.
Conclusion
There’s no need to panic if you have spilled the super gorilla glue on your carpet. You can use any of the above-mentioned methods on how to get gorilla glue out of the carpet.
Make sure you always test a small area of your carpet before applying any chemical or solution onto it.
And act as quickly as possible.
FAQs
How does applying heat to gorilla glue helps to remove it?
Heating the glue softens it, which makes it easy to lift it up using a dry cloth or a paper towel.
What is the best way to dissolve the gorilla glue?
Applying acetone is the best way to remove gorilla glue. Use 100% acetone solution, pour it on a cotton ball, and apply it on the affected area.
Does hydrogen peroxide works on gorilla glue?
Yes, hydrogen peroxide is the safest option to get the gorilla glue to the carpet.
Use a cotton ball and soak it in the hydrogen peroxide solution and dab it onto the glue. Use a fresh cotton ball and blot up the residue.
Daleyza knows a lot about carpets! She has worked with carpets for over 7 years and can help with things like putting them in, keeping them clean, and replacing them. She really likes carpets and spends most of her time learning about new ways to work with them. When she’s not learning about carpets, she enjoys reading books. She’s really good at helping people choose the right carpet for their homes and making sure they’re happy with it. If you want to know more about carpets, Daleyza is the person to talk to!