How To Clean Heavily Soiled Carpet?

Carpets are notorious for being one of the most high-maintenance flooring choices, and if it is heavily soiled, it can be a source of embarrassment in front of your guests. This soiling can be due to anything, such as food or oil spills, heavy foot traffic, unusual pet accidental marks, paint marks, etc. But in all these conditions, the question stands the same: “How To Clean Heavily Soiled Carpet?”

How To Clean Heavily Soiled Carpet

In this guide, we’ll provide a complete guide on the best deep cleaning techniques for carpets and how to maintain your carpet to increase its lifespan.


Tips To Fix Stains On Carpet

Tips To Fix Stains On Carpet

One of the major reasons for the carpet being tremendously filthy is not cleaning it regularly. If you deep-clean it in 12 to 18 months and stain-clean it immediately at the time of spill, then the stains will not accumulate and attract more dirt over it.

Whether the stain is of coffee, wine, chocolate, or makeup like mascara or foundation, you should grab the damp microfiber towel and blot the stain to eliminate the exposed soil. If the stain contains waxy components, such as Scentsy wax or crayon, then scrap it off and use an iron at low temperature or an ice pack to eradicate the remains embedded deep into fibers.

You can use any stain-cleaning spray with deodorizing properties, but if you wish to prepare a DIY cleaning solution, then,

  1. Add 1/4 cup of vinegar into 1 tbsp of Dawn dish soap, and mix both into a bucket filled with water. 
  2. Liberate the solution on the stain and leave it to soak for 5-10 minutes.
  3. Bloat the solution with a sponge and rinse it with clean water.
  4. Once the stain is removed, dry your carpet under the sun or ventilate the room to let the air flow inside.

How To Clean Heavily Soiled Carpet?

Usually, a carpet laid on heavy foot traffic regions, such as hallways and living areas, has a higher chance of getting more soil than one unrolled in a bedroom. That is why you need to be more precise and attentive while choosing a deep cleaning method for such areas.

To breathe new life into your wall-to-wall, you can opt for a few cleaning steps, such as:

Step 1: Inspect The Carpet

Inspect The Carpet

Before moving directly onto soil treatment, try to identify the regions with more significant stains, dirt, and grime. This inspection will help you determine a proper carpet cleaning method and solution.

Also, find out if there are any tough stains on your wall-to-wall, such as pet pee, accident marks, or wine or coffee spills, because such a region will need your special attention and perhaps a different cleaning hack.

Step 2: Vacuum The Carpet Thoroughly

Vacuum The Carpet Thoroughly

Vacuuming is one of the most essential carpet pre-deep cleaning projects that can eliminate any regular dry debris, including your pet’s hair. Its high suction power and rotating brush agitate the fibers and lose the dirt particles embedded deep into the fibers.

So, what are you waiting for? Grab a vacuum cleaner and move it at least 2 to 3 times on your carpet. Remember to cover the highly soiled region, edges, corners, and area around baseboards that are usually left untouched during regular cleaning.

If you own a high pile carpet, then go for a few more dry stroked to suck up the filth hidden deep into fibers.

Step 3: Use A Carpet Cleaning Solution

Use A Carpet Cleaning Solution

After vacuuming your wall-to-wall, look deeply at the heavily soiled regions and check if any pests or larvae are growing. If any, use a solution with both un-soiling and pest-controlling capacity.

There are many cleaning solutions available in the market that can help you with both, but if you are planning to skip commercial products due to their high chemical composition, then you can prepare a special homemade solution like Bissell carpet cleaner solution.

Solution 1: Use Laundry Detergent / Dishwashing Liquid

Use Laundry Detergent

Typically, laundry detergent is designed to clean fabric stains and dishwashing liquid to un-spot dishes or utensils, but both of these cleaning agents can act as a carpet shampooer, especially for rugs carrying heavy soil. To use them,

  1. Add 1⁄4 teaspoon of non-bleach laundry detergent or dishwashing liquid in 1 liter of water.
  2. Pour the solution on the carpet, ensuring that your rug does not overwet.
  3. Blot the stains and high-foot traffic region with a sponge and rinse the carpet with clean water.
  4. Keep rinsing until the foam of solution and filth continues to blast out.

Solution 2: Use Baking Soda Paste

Use Baking Soda Paste

Baking soda is a versatile product that can be used in cleaning, cooking, neutralizing foul odors, and eliminating moisture. It has an excellent absorbing capacity that can lock in any filth and stain, such as water, oil, grease, etc.

To use this all-purpose cleaning agent for your carpet un-soiling project,

  1. Sprinkle a generous amount of baking soda so that it covers every corner of your carpet.
  2. Leave it for some time or overnight to let it absorb the filth residue.
  3. Blot the extra soiled regions with a damp towel and wipe to remove filth and baking soda.
  4. Now, prepare a baking soda paste by adding water and apply it to the stains.
  5. After some time, remove the paste with a clean towel and vacuum it to fluff up the carpet.

Solution 3: Use White Vinegar Solution

Use White Vinegar Solution

Just like baking soda, white vinegar is a fantastic cleaning agent that can dissolve any grime, grease, or stubborn filth. But due to its acetic nature, you have to apply it on an inconspicuous part of your rug first to ensure its compatibility and colorfastness.

Here’s how you can use it:

  1. Mix an equal amount of white vinegar into warm water and pour it into a spray bottle.
  2. Sprinkle a generous amount of mixture on the affected areas and wait for 5 to 10 minutes until the carpet fibers sock up the solution.
  3. Once the solution disappears, blot the stain with a clean cloth and rinse it with water.
  4. Check the stains and soil. If it’s still there, then repeat the complete cleaning process again.

Solution 4: Use Hydrogen Peroxide Solution

Use Hydrogen Peroxide Solution

The hydrogen peroxide has more anti-soiling capacity than any solution available in the market. Its oxidizing and antimicrobial properties deep clean any carpet and dissolve stubborn stains, whether it’s older than a year.

However, you cannot use it directly on your carpet as many people get suspicious of will the hydrogen peroxide bleachs the carpet. Therefore, instead, you can prepare a solution by adding the following ingredients:

  1. Mix 3/4 cup of hydrogen peroxide into 1/4 cup of white vinegar and add 2 tbsp of fabric softener.
  2. Mix all the cleaning agents well and then pour 2 tbsp of dishwashing liquid to increase the cleaning capacity of the solution.
  3. Add the mixture to 1 gallon of warm water and use it to saturate the carpet well.
  4. Use a damp microfiber towel to blot the stains, and rinse your carpet with cold water.
  5. If any foul odor remains after cleaning, then add a few drops of essential oil to your prepared solution and use it again for deep cleaning.

Solution 5: Use Club Soda

Use Club Soda

Club soda, simply termed carbonated water, contains carbon dioxide, potassium sulfate, and sodium bicarbonate. It is used in commercial carpet cleaning solutions due to its quick anti-soiling properties and non-toxic nature. It is excellent in lifting stubborn stains, grime, and filth like pet pee set deep into fibers. To use it for your carpet un-soiling,

  1. Sprinkle a generous amount of club soda on the carpet stains and leave it to sit for 5 to 10 minutes.
  2. You can leave for more than 15 minutes if your carpet is highly soiled.
  3. Blot the stain with a clean microfiber cloth or paper towel and vacuum it thoroughly to lift away the cleaning agent and filth remains.

Solution 6: Use Vinegar And Borax Solution

Use Vinegar And Borax Solution

As discussed above, vinegar is a fantastic cleaning agent that lifts filthy stains with its acetic properties. However, it is a bit harsh to use alone and can sometimes make you look for methods to remove the vinegar smell from the carpet! So, to increase its safety, productivity, and results,

  1. Add 1/4 vinegar into 1/4 of borax and salt and spray it evenly on the carpet.
  2. Leave the solution until your carpet dries completely.
  3. Vacuum the carpet to remove the stain and all the loose filth.
  4. Now, steam clean your rug by giving a few hot water strokes and blasting out all the grime and grease embedded deep into the fibers.

Step 4: Dry The Carpet

Dry The Carpet

It is crucial to dry a carpet properly, especially when it’s fixed on the floor. For this, you can either ventilate your room by opening doors and windows or switch on a few big fans to speed up the drying process but how long will it take the carpet to dry?

Although, you can do both at the same time, but if you live in extreme weather conditions, you can also use a dehumidifier. It will help your wall-to-wall to dry properly without leaving any moisture in the backing.

Point To Remember: 

  • Do not walk or sit on the wet carpet, as a rug containing moisture is at a high risk of attracting dirt.
  • Avoid placing any furniture before the carpet dries because the moisture can also get into the base of the furniture and can lead to cupping, crowning, and buckling.

How Often Should You Deep Clean Carpet?

How Often Should You Deep Clean Carpet

Carpets are the most sensitive flooring choice that needs extra care. To keep it clean, you should vacuum it regularly or twice a week so that the dry debris does not accumulate in the fibers.

Also, you should deep clean your carpet once every year. For this, you can either call a professional carpet cleaning service or employ a self-owned carpet cleaner. If you do not want to use a commercial carpet cleaning solution, then you can use any of the above-discussed solutions.

Once you complete your carpet deep cleaning process, remember to dry it and then vacuum thoroughly to fluff up the carpet fibers.


How To Clean Heavily Soiled Carpet? | Summary

A heavily soiled carpet needs extra time and effort to clean, but if you opt for the right approach, then you can achieve a spotless rug without much effort. So if you think, “How To Clean Heavily Soiled Carpet?” then instead of picking out commercial cleaners, you can find a few DIY carpet cleaning solutions and a step-by-step guide.

By this, you can restore your beloved wall-to-wall from grease and grime without paying for professional carpet cleaning services.


How To Clean Heavily Soiled Carpet? | FAQs

How can I remove old stains from the carpet?

To eliminate the old stain, you can sprinkle a generous amount of baking soda on the carpet and pour a solution containing an equal amount of white vinegar and water. You can also add a few drops of dishwashing liquid to increase the solution’s effectiveness and then leave it on the stain for a few hours.

Can old moldy carpets be cleaned?

If your carpet is older than 15 to 20 years and there are molds and mildew over it, then perhaps it’s the right time to replace it because such an old carpet cannot be kept clean for long.

Can you use a steam cleaner to clean heavily soiled carpets?

Yes, you can definitely use a steam cleaner to clean heavily soiled carpets. It will blast out all the deep-rooted filth from the carpet fibers and kill germs and bacteria with its hot water extraction.

Leave a Comment