Carpet adds color, warmth, and texture to a home, but its daily use can promote staining and trapping of allergens. While regular vacuuming is the first step in carpet cleaning, when it comes to stains, only carpet cleaners can do the job. However, people always confuse carpet cleaners with the steam cleaning process and ask: Is A Carpet Cleaner A Steam Cleaner?
It’s mainly because both methods work well in cleaning and help extend the life of the carpet. Hence, it’s essential to delve into the details and clear the myth!
And for this, we are going to come up with the similarities and dissimilarities between both and help you decide which exfoliating method you want to opt for.
Carpet cleaners play a crucial role in maintaining the cleanliness and hygiene of your living areas. It injects carpet shampooing solution into the carpet fiber to blast out all the filth and stains.
For this project, carpet cleaners employ powerful scrubbers, rotating brushes, vacuum suction, and other agitators for solution extraction. And then perform a wet and dry stroke cleaning project to remove stains, dirt, and pesky allergens from carpets.
Today, carpet cleaning involves a foaming substance that is applied on a carpet with a brushing machine. This provides better exfoliation and allergens eradication without going for several strokes.
The process of cleaning involves:
- Preparing the carpet cleaner by filling its clean water tank with clean water.
- After this, Pour the cleaning solution into the solution compartment up to the maximum line.
- Set the dial according to what kind of wash you need, and then plug in the cleaner.
- Move the cleaner on the carpet by pulling the trigger to give a few wet strokes.
- Now, move again from the same spot to give a few dry strokes. For this, leave the trigger and glide the cleaner over the same place.
- After you clean the whole carpet, pull out the dirty water tank and empty it in a sink.
- Pour some clean water, but this time without any solution, and move the cleaner in the carpet to blast out all the dirt and solution from the carpet.
- Clean your carpet shampooer thoroughly and leave it for a few hours to dry.
- Dry your carpet under the sun for 6 to 10 hours.
A steam cleaner works best against stubborn stains that can’t be detected by the naked eye easily. It is a hygienic cleaning option as it does not involve harsh cleaning chemicals. Then, how does it actually perform the whole cleaning?
For this, a steam cleaner rushes water of high temperature, typically 92 to 148 Degrees Celsius (200 F to 300 F), through its nozzles or brush attachment and directs it to the deep down layers of carpet and its fibers.
The hot water cuts down all the grease, grime, and other embedded filths and removes the bacteria, molds, and mildew. These cleaners are usually smaller. Hence, it’s easy to carry them in all parts of the room, especially in the high-traffic zones.
If you are assuming how this multi-tool cleaner actually works, then let’s break it down for you:
- Inside the cleaner, there is a sealed water reservoir which heats up the water to the required high temperatures.
- Once your hot steam water is prepared, it is ejected through a nozzle or attachment towards the carpet with high pressure.
- After this, the hot water loosens dirt, stains, and pesky bacteria and lifts them away from the surface. This helps in easy blasting out of filth without employing any harmful cleaning solutions.
- After the completion of the whole cleaning procedure, you can wipe off your carpet with a mop or a vacuum cleaner to eject hot and contaminated water from its place.
Is A Carpet Cleaner A Steam Cleaner?
There is a common misconception about equating carpet cleaners with steam cleaners, but as we have discussed above, there is a huge dissimilarity even though they are assigned to the same project.
A steam cleaner only uses hot water extraction, while a carpet cleaner employs cleaning solution and agitating tools to scrub out the grime. Although you may use the carpet cleaner every 12 or 18 months, but a steamer could be used in between to un-strain the carpet and draw down the allergens.
Hence, it’s better to not mix up both cleaning techniques and employ them according to what kind of extraction you need for cleaning.
Which One Is Better For Deep Cleaning?
On one side, steam cleaners have way less drying time, and on the other, carpet cleaners are way gentler on carpet fibers as they do not recruit hot water to cause stiffness. Both have their own advantages, so instead of neglecting one, use them according to your cleaning needs, such as
- If you want to clean tough stains, grime, and grubby dirt, use a carpet cleaner with a commercial or DIY cleaning solution.
- If you want to refresh your carpet and kill bacteria, molds, and mildew, then work with steam cleaner hot water extraction.
Carpet cleaners are the most versatile and adorable cleaning equipment, whereas a steam cleaner is best for eradicating invisible filths with high steam pressure technology.
So, if you also are unsure between a steam cleaner and a carpet cleaner due to their large-scale availability and similar work effect, then instead of asking: Is a carpet cleaner a steam cleaner? Ask how you can use it to give the best cleaning to your carpet and what difference it may bring to your cleaning experience.
How much time does a carpet take to dry after steam cleaning?
Generally, a carpet takes between 3 and 8 hours after steam cleaning, but if you use excessive water with a bit of solution for unsoiling, then the time may also extend to 24 hours.
Why does my carpet get dirty quickly after cleaning?
If your carpet is getting dirty instantly after deep cleaning, then perhaps you have not unmoistened it well, or there is some cleaning solution residue that is attracting filth and mildew toward it.
When does a carpet need replacement?
If your carpet is older than 12 to 15 years, then instead of calling the professional cleaning services for your carpet cleaning, replace your carpet with a new one. Because even though your carpet will be clean, it still has a large capacity to attract molds and mildew and trap dirt.
Daleyza knows a lot about carpets! She has worked with carpets for over 7 years and can help with things like putting them in, keeping them clean, and replacing them. She really likes carpets and spends most of her time learning about new ways to work with them. When she’s not learning about carpets, she enjoys reading books. She’s really good at helping people choose the right carpet for their homes and making sure they’re happy with it. If you want to know more about carpets, Daleyza is the person to talk to!