You must have tried many primeval traditional methods to detach stains from the carpet, and among all, the most prominent one is washing it off with detergent. However, the success of this method is on tenterhooks as it may leave behind some patches of stains. So, what else could be done, especially if you want to achieve a stainless carpet without washing it? There are few methods that include ironing, but “Can You Steam Clean A Carpet With An Iron?” If yes, then how can you carry through this?
This article will answer all your questions regarding steam cleaning a carpet with an iron. You can undergo these methods and their steps in succession and select a method through which you want to gain a spotless carpet.
Can You Steam Clean A Carpet With An Iron?
Yes, it is possible to stem clean a carpet with an iron, but for that, you have to be pre-prepared about a few things, like the solution, which will act as a lubricant, a clean light colored towel to transfer the stain from carpet and plugged in hot iron, set at a high or low level as per stain and lubricant used.
But have you ever wondered how stains transfer from one fabric to another? Well, the answer is quite simple:
When you add a solvent over a stain, it acts as a lubricant and that stain remover contains bleaching agents that break down color-causing chemical structure sections.
On ironing, just after applying such bleaching agents, the color automatically transfers from the carpet.
How To Steam Clean A Carpet With An Iron?
You can get a spotless carpet just by a steam clean, and there are various methods to execute this, but before that, you have to clean the carpet thoroughly with a vacuum cleaner to remove dry debris.
Now, let’s discuss all the steam cleaning methods one by one:
Method 1: Use Dish Washing Liquid
This is the most home-friendly method, as every household already has a dishwashing liquid. If not, you can go for any available detergent powder, as it will give the same results on your carpet. To make a solution and get the outcome,
- Add 5 to 7 drops of dishwashing liquid into 2 cups of warm water.
- If the stain is extensive, then add 2 spoons of liquid in 4 cups of warm water.
- Dip a clean light colored towel completely into the solution and place it over the stain.
- Obliterate it until the stained region is damp.
- Plug in the iron, set it at low or medium temperature, and place it over the towel for 2 minutes.
- Move the iron back and forth and then again leave it for a few minutes.
- If you can still see some stains, then repeat the process until it is completely eliminated.
- Split the towel and dip it into the solution for a few extra ironing strokes.
- Vacuum the carpet after the stain is removed completely.
If you assume that, why do we need to place a light-colored towel?
A white color will show the accurate result of stain removal, and you can easily identify which part of the towel is already used while splitting it for extra stains.
Remember, the dirtier the towel is, the cleaner the carpet gets, and if you don’t want to spoil a towel, then use an old one. Just ensure the towel is clean and its fibers are not stiff.
Method 2: Prepare A White Vinegar Solution
White vinegar comprises 4–7% acetic acid and 93–96% water which helps in removing stubborn stains from a fabric without any discoloration. That is why if it is used attentively and in the right quantity, then white vinegar solution will remove stains without being harsh on the carpet. For this,
- Add 4 big spoons of white vinegar into more than 1/2 cup of water and pour it into a spray bottle.
- If the stain is big enough not to get covered by this quantity, then add more solution with the same proportion.
- Spray the solution over the stain until the entire patch is covered completely.
- Take a light-colored towel and damp it in warm water.
- Place the damp towel over the stain neatly and press it lightly with iron.
- Set the iron at high temperature to get a better outcome.
- Check if the stain is eliminated completely. If not, then repeat the process until you get the results.
- Wipe out the carpet with clean water to remove solution from it.
Method 3: Use Scratcher To Steam Clean A Carpet With An Iron
Wax seems to be handled easily by washing, but it is difficult to remove, as wax gets settled and attached to carpet fibers. So, to eliminate it completely from your carpet, you can follow these steps:
- Take a loose knife, scissors, or butter knife and scratch the waxed region on the carpet.
- Try to remove all extra wax just by scratching before moving further.
- Place a paper towel on the wax remains and iron the region at medium temperature.
- By this, the wax will be liquified and socked by a paper towel completely.
- Add powdered baking soda on the spot and vacuum it until the stain is removed.
Can You Steam Clean A Carpet With An Iron? | Conclusion:
It is difficult to answer, “Can You Steam Clean A Carpet With An Iron?” but if you know the proper technique for its execution, then it is one of the easiest methods to go for.
Steam Clean the carpet only after going through all the methods listed above and determining which method will suit your spotted carpet.
Can You Steam Clean A Carpet With An Iron? | FAQ’S:
Which one is better among iron or steamer to remove stains from carpet?
The choice between iron and steamer totally depends upon the fabric material you are treating. If you are removing stains from a stiffed cotton fabric, then iron works best in such cases. And if you are planning to give steam treatment to stains, then the material should be sleek, like silk or wool.
Why is my carpet still dirty even after steam cleaning it with iron?
It can be possible because of molds attached to the carpet’s padding. To remove such molds, obliterate the padding or give your carpet a deep clean. You can also call professionals for the same.
Why does my carpet smells just after steam cleaning?
If you notice a smelly carpet just after you give it a steam clean, then you may have used a large amount of water and liquid on it. This smell will automatically removed after a few minutes of steaming. You can also provide ventilation to your room for rapid odor removal.
Daleyza knows a lot about carpets! She has worked with carpets for over 7 years and can help with things like putting them in, keeping them clean, and replacing them. She really likes carpets and spends most of her time learning about new ways to work with them. When she’s not learning about carpets, she enjoys reading books. She’s really good at helping people choose the right carpet for their homes and making sure they’re happy with it. If you want to know more about carpets, Daleyza is the person to talk to!