Can You Change Skirting After Carpet?

Everyone wants to live in an adorned and embellished home, and for this, they usually undergo several changes, such as installing a brand new carpet or placing a skirting board along the wall. But can you change skirting after carpet?

This question is typically asked when someone has already fitted a carpet with padding on and suddenly contemplated that his drab and tattered skirting also needs a major makeover.

Can You Change Skirting After Carpet

Well, in such a case, it’s not an intelligent step to rip off the whole carpet and then fit a skirting board, and after all of these back-breaking efforts, lay the carpet again. So, is it possible to place skirting after carpet, or is there any other simple installation method?

Let’s find out!

Is It Safe To Change Skirting With Carpet On?

Is It Safe To Change Skirting With Carpet On

Honestly, it’s not a plain sail to save a carpet from wear & tear, especially on an occasion like skirting installation. Why are we saying so?

Suppose you have a freshly unrolled rug in your room, and just above that, you are drilling and making cuts on the wall and skirting and then sticking the board in its place.

Do you think it’s easy to save your carpet from such an accomplishment? Because you can easily get the marks of glue or claw the rug while drilling, right?

So, for your carpet’s safety, it’s better first to understand the complete build-in method and then make some initial arrangements. Even after these arrangements, you can call professionals if you are unsure about doing the whole procedure yourself.

Can You Change Skirting After Carpet?

Can You Change Skirting After Carpet

As discussed above, placing skirting with carpet is difficult, but it’s not an impossible task to fulfill. You can definitely change skirting with carpet on after taking care of a few precautions, such as,

  1. Cover your carpet with a plastic sheet or drop cloth to avoid material from falling on it and sticking in its long fibers.
  2. Ensure that the gripper fits well and that no tucking gap is left while you stretch the carpet into it. This will bring a thoroughly professional finish without paying for it.
  3. Do not place equipment on the carpet while fitting to avoid wear & tear.
  4. You can also use metal sheets on those areas of carpet where you are drilling to place skirting.

After all these arrangements, you are all set to move further and launch the installation mission!

How To Change Skirting After Carpet?

If you are taking this renovation project into your own hands, then it is essential to know every detail of its accomplishment. This is especially because you may leave gaps between the carpet and the base of the skirting or place the skirting tight, leaving little space to tug in the rug underneath the board.

Hence, we emphasize that to complete this task as a self-build project, you need to pre-prepare every right tool and a perfect step-by-step guide with practical knowledge.

If you’re wondering where you would get such a perfect guide, then don’t worry because we are here to help you out with every small detail.

Tools Required

  • Hammer
  • Silicone Gun
  • Skirting Board
  • Screws
  • Drill
  • Coping Saw
  • Mitre Saw or Mitre Box
  • Adhesive
  • Tape measure
  • Nails
  • Screws
  • Wood filler

Start With Measuring And Cutting

Start With Measuring And Cutting

You can’t directly jump into installation, right? Before that, you need to measure the region you are fitting out and then cut the board as per its outcome. And for this,

  1. Take a measuring tape from your toolbox and then measure the existing board attentively.
  2. Ensure that you measure correctly, especially the areas touched with corners.
  3. After this, add 20% to your outcome to manage the board in case of contingency.
  4. If your skirting board has a pattern or marks, then beware of cutting in a way that matches the pattern of each slab with the other one.
  5. Cut the skirting board with a mitre saw and miter box for a perfectly straight slash.
  6. After each cut, check the template on the fitting region and then move to another cut.
  7. To cut away the waste section, you can use a chopping saw.
  8. Plan the exact placement of each cut to avoid the need for a board with scribes at both ends.
  9. Make sure that where the board cutouts are meeting should have a 45-degree angle. This will give you fine-fitted borders without gaps and ridges.
  10. Use a marker or pencil to mark up each cut before mitreing.

Remove The Existing Skirting Board

Remove The Existing Skirting Board

This is a simple yet technical task, as you need to be extra attentive to not rip off paint or plaster of the wall while removing skirting. For this,

  1. Use a wide jointing knife, which is generally used for plastering walls.
  2. Snap it to the edge of the skirting and gently hit it with another knife or hammer to pull out the skirting from the wall.
  3.  You can start from the corner and then move further toward the center after each hit.
  4. Remove the skirting from the wall and pull out existing nails from it.
  5. Smooth the wall with sandpaper and then plaster it before placing a new board.

Install The Skirting Board

Install The Skirting Board

After ensuring that you have every tool and cut ready with you, mask up your hands because we are finally going to use drillers and work with adhesives. To begin with this installation,

  1. Fix each cut in its place and use an adhesive to stick them well on the wall.
  2. You can use blobs of adhesive or run a couple of beads along the back of the board. 
  3. Press the board towards the wall so that it is attached neatly.
  4. Wipe off the excess after ensuring that the board is firmly attached.
  5. If you want to use screws instead of adhesive, then mark the drilling positions on the board and then bradawl through the skirting and wall.
  6. If you are working on a concrete wall, then run the drill into the skirting and mark the wall behind it.
  7. Drill the holes on the marked section and then insert the screws so that it fits and disappears in its place.
  8. If there is any gap between the wall and the top of the skirting board, you can use decorative chalk to fill in those gaps.


It’s not difficult to ask, “Can You Change Skirting After Carpet?” but trust me, it’s highly complex to accomplish it, especially if you have never installed skirting even without carpet on.

Hence, you need to check the complete method and learn sincerely how to make each cut of board worth counting and place it on the wall. In addition to this have you ever wondered: is carpet padding toxic or not?


What is better, among screw and adhesive, to fix the skirting board on the wall?

There are two methods that people typically opt for. One is screwing, and another is pasting with an adhesive. The second method, consisting of grip filling, is better than drilling and screwing, as drilling is a bit time-consuming and complicated task for a self-build project.

Is it hard to replace skirting with carpet?

It’s a little complicated to replace skirting with carpet, as it involves several steps, such as cutting and edging, removing the existing board, and placing a new one while taking care of the carpet’s size and width. But with the right tool and procedure, you can easily fit a new skirting after removing an old one.

What are the best types of skirting boards?

In your home, you can use softwood or hardwood skirting, tiled skirting, or MDF skirting. If you want to go for traditional styling, then among the above options, hardwood skirting will be the right choice for you.

Leave a Comment