How Much Does It Cost To Carpet A 10×12 Room?

Carpets are the most luxurious thing on the floor, and their soft and delicate texture usually attracts the buyer towards it. Getting the right carpet for your floor, which enhances the beauty of your room, is a dream for everyone. But you can only achieve this dream after knowing “How Much Does It Cost To Carpet A 10×12 Room?”

How Much Does It Cost To Carpet A 10x12 Room

Your room resembles your lifestyle, so choosing the right carpet that matches your way of life is important. And more important than this is to get a carpet of the exact same size as your room.

How big is a 10×12 room?

How big is a 10x12 room

The size of your room matters a lot in figuring out which carpet you will buy and at what price. So for that, you need to know the size of your room.

If you know that your room size is 10×12 square feet but are assuming what it means, then you will get a clear idea about this just now.

Square Feet = Length x Width

i.e., 10 x 12 = 120

By the above equation, we can say that a 10×12 square feet room means 120 square feet. Now, it must have become easier for you to understand what is meant by a 10×12 square feet room.

How much does it cost to install a carpet?

The cost of a carpet varies as per its size and area, the material used, and many other factors. And you need to consider all these factors before you go for installation.

Other than this, there are a lot more things attached to a new carpet’s price. Let’s look at them one by one:

Get An Idea Of Carpet Costs

Get An Idea Of Carpet Costs

The most considerable figure that you are going to pay is, of course, of the carpet itself. The cost of a carpet depends on different factors, as discussed above, and while keeping it in mind, let’s see what the average cost of a carpet is:

  1. The average cost of carpet is around  $1 to $5 per square foot for the materials.
  2. If you are going for some cheaper options like nylon, olefin, or polyester, then it is going to cost you around $0.50 to $0.75.
  3. Medium to high-quality carpet costs $2 to $10 per square foot on average.

 These prices vary with the change in carpet material. To understand it better, let’s look at some figures to get a better idea of pricing. 

GradePrice per square footFeatures
Cheap grade carpet$0.50 – $1.501. Lasts 3 to 5 years.
2. Not that long-lasting
3. Nylon, polyester
Mid-grade carpet$1.50 – $6.001. Lasts 6 to 12 years
2. Has better quality than nylon & polyester
3. Sisal, Olefin, Triexta
High-quality$6.00 – $21.001. Lasts 12 to 20 years
2. Has the best-desired quality and lasts long
3. Wool

If you want to calculate the cost of your desired carpet, then you can use a simple formula:

Cost of Carpet = Price Per Square Feet x Area of Carpet

Before you go to a dealer to obtain the idea of his figures, calculate it on your own according to the given table. By this, you can ensure that you are getting the right price paid for your carpet installation. To know the appropriate cost of installing the carpet, you can use this calculator.

Buy Padding with Carpet To Carpet A 10×12 Room

Buy Padding with Carpet

You must be wondering what is the use of padding in a carpet. Well, padding acts like a cushion underneath a carpet, which protects it from wearing and tearing. It will help your carpet to last long while maintaining its beauty for the long run. It also protects the carpet from foot traffic and furniture that you would put above it.

Carpet padding material costs $0.25 to $1.00 per sq foot, and with installation, it will cost you around $0.75 to $1.75 per sq foot.

Its expense is worth your carpet protection; hence, it is imperative to give it a consideration along with the carpet. Also, try to get the padding of the same size as your carpet to avoid inconveniences.

Don’t Forget To Buy Track Slips

Buy Track Slips

Just above your room’s floor, track slip or rug tape is going to be your first layer, which will help your floor to keep padding and carpet in place and protect you from slipping on the carpet while passing through. If you already have track slips, then just check if they are in good condition or not. If you don’t have any, then buy them as per the size of the corners of your room.

To measure how long track slips you have to buy for your carpet installation, then use the length and width measurements that you just took and multiply them by 2. Also, add 10% to your measurement to get accurate results. Ensure that the track slips you are buying are broad enough to keep the carpet stuck in its place.

With this, make sure that the track slips you are buying already have nails with them for easy installation because if your new track slips don’t have nails with them, then it will escalate your work a lot.

How To Install Carpet On The Floor?

How To Install Carpet On The Floor

To get your floor perfectly covered with carpet, you have to take care of every point that we are going to discuss in this article. But before that, let’s see which tools you will need during process:

Tools used in Carpet Layering To Carpet A 10×12 Room

  1. Track Slip
  2. Staple gun 
  3. Chalk line 
  4. Tape measure
  5. Duct tape
  6. Seaming tape
  7. Knee pads
  8. Knee kicker
  9. Power stretcher
  10. Rolling pin or carpet roller
  11. Seaming iron

Installation Process To Carpet A 10×12 Room

Each step of carpet installation is equally important, whether it be track slip installation, padding, or carpet installation itself. Prepare all the tools as mentioned above in advance to avoid any confusion while you start installing.

Nail The Tack Strips On The Floor

Nail The Tack Strips On The Floor To Carpet A 10x12 Room
  1. Before going for carpet installation, nail the tack strips about 0.25 to 0.5 inches from the wall.
  2.  Ensure that the slips are in a straight line and point towards the wall. 
  3. Use 2 nails for each strip and place it into the wood. 

Lay Out The Padding On The Floor

Lay Out The Padding On The Floor To Carpet A 10x12 Room
  1. After the completion of track slip installation, place the padding just above the slips. 
  2. Place it properly and check if it is covering all sides of the wall or not.
  3.  Placing the padding on two sides of a wall at a time to ensure that there are no bulges between the floor and padding after complete installation.
  4. Staple the padding after installation with the help of a staple gun. 
  5. Make sure to staple the padding on every edge of the slips to make sure that the padding will not get off its place.
  6. You can also use padding glue underneath the padding to ensure its stability on the floor.

Do Some Finishing After Installation

Do Some Finishing After Installation

Well, yes, it’s not over yet. You might be confused that after rolling such a big task in your room, what else do you have to do? 

Can you see some bulges on the carpet? You need to fix these bulges as soon as possible, and for that, you have to follow a few steps to see some great changes in your installed carpet.

  1. Use some duct tape after rolling the seams on the floor, as it will keep the carpet stuck in its place. 
  2. If you are installing carpet over concrete, you should use synthetic fiber under the carpet as it will prevent condensation. In such cases, use duct tape for installation.
  3. To stretch the carpet and place it in its place, use knee kickers continuously on the carpet until they are placed correctly over track slips. Then, place the rolling pin and work on your carpet finishing. 
  4. Iron out any small creases that may be present on the carpet after installation. 
  5. Use a knife to cut down the access. You can also use a Stanley knife to cut the carpet.

How much does it cost to carpet a 10 x 12 room?

cost to carpet a 10 x 12 room

If this question is still there in your mind and you want to know the overall cost that you will have to pay after the final installation of the carpet, then here are some figures for it.

Here, the final installation will also include some labor costs, and carpet installation as a whole will cost you around $1 per sq foot to $2 per sq foot. 

If we include labor costs, then it will cost between $150 to $900 for a 10 x 12 room after adding all at once. 

Tips To Choose A Perfect Carpet Fiber For Your 10×12 Room

As already discussed above, the price of the carpet varies as per the quality and material. The low-quality carpets like nylon and polyester cost less but are not long-lasting and go through various wears and tears with time. In contrast, wool and olefin are expensive but last for a long while, giving comfort.


Nylon To Carpet A 10x12 Room

Nylon is the most used material for carpets as it is readily available and durable, and it typically costs between $2.69 and 8.49 per square foot. They are lightweight and easy to wash, and with this, nylon carpet holds out against shrinking and wrinkling.

But the best quality of nylon, due to which many consider it as their choice, is that it absorbs less moisture in comparison to other materials.

Despite these advantages, nylon carpets have some disadvantages as well, such as they are not stain-resistant and melt on catching fire. And if you are someone who is searching for a material that does not get stained easily, then you can opt for some other options.


Polyester To Carpet A 10x12 Room

This synthetic option is more affordable for people who want cheaper options. Polyester costs $0.65 to $6.59 per sq foot and is strong and durable. Like nylon, they also resist shrinking and dry quickly after washing. Its most significant advantage is that it can be recycled easily, but despite these advantages, there are some disadvantages to buying a polyester carpet:

  1.  Polyester is less breathable than natural fibers 
  2.  Pile retention for carpet is poor in polyester as compared to nylon

After considering these points, you can decide whether you want to go with this material or want to check other option to ensure that other features also comes in.


Wool To Carpet A 10x12 Room

If you are in search of the best carpet option and are not considerate about its price, then wool is the best option to go for. This natural fiber is soft, durable, and fire-resistant. They bring a long-lasting style and comfort to your room, which will give you an opulence vibe.

Wool carpet costs between $3.59 and $12.04 per square foot. But, it can be considered pocket-friendly because of its long-lasting nature.


Acrylic To Carpet A 10x12 Room

Acrylic is also called ‘man-made wool’ and is considered similar to wool, but because of its synthetic nature, it costs less than wool.

Acrylic carpets are strong and durable and do not catch fire easily. They are easy to clean, which makes them a choice for many. Of all these advantages, they cost between $3 to $ 8 per square foot, which is slightly cheaper than wool.


Silk To Carpet A 10x12 Room

Silk is mainly used in rugs rather than in carpets, and this is because of its expensive nature. If you are opting for this option, then you have to consider its features and availability. Silk is excessively soft and slippery, which is unsuitable to be beneath your foot.

Olefin or Polypropylene 

Olefin or Polypropylene To Carpet A 10x12 Room

Regarding carpets, people are still not familiar with olefin and often wonder about “what is olefin?”. Olefin or Polypropylene is one of the most popular fibers. Its popularity is mainly because of its long-lasting color and less discoloration. It seems to be new for years, which made it a good choice for many buyers.

Olefin or Polypropylene typically costs between $0.65 to $5.86 per sq foot, which is also pocket-friendly for many buyers.

Consider all the options carefully

After going through all the available options, designs, and materials, you can calculate your desired carpet’s exact price before going to the retailer because your consciousness will protect your pocket from exceeding the load on it.

Also, make sure that you are opting for a suitable material for your home, as it will be the beauty of your whole room.

How Much Does It Cost To Carpet A 10×12 Room? | Conclusion:

To make your 10 x 12 room appealing, buying a carpet can be the best-to-go option for you. And for this, go through all the options before deciding what suits better for your room.

The carpet cost can also vary as per your chosen retailer and the carpet’s quality. To know “How Much Does It Cost To Carpet A 10×12 Room?” go through the article thoroughly and then consider all the available options and their materials before making your way to the carpet in your room.

How Much Does It Cost To Carpet A 10×12 Room? | FAQ’S:

What types of carpets are the cheapest?

If you want to go for a cheaper option for a carpet, then nylon & polyester can be the destination of your search. Nylon carpet may cost between $2.69 to 8.49 per square foot, and polyester can cost somewhere between $0.65 to $6.59 per square foot.

How much does it cost to remove the existing carpet?

If you are thinking of bringing on a new carpet by removing an older one, then you need to know a rough figure about how much its removal will cost. Carpet removal may cost you somewhere between $1 and $5 per square foot, which may vary as per your location.

How do you calculate the cost of carpeting a room?

To calculate the cost of carpet, use the formula: Cost of Carpet = Price Per Square Feet x Area of Carpet. But before making the calculation, get a rough idea of your desired material price.

Leave a Comment